|
MODEL |
DESCRIPTION |
TKV-460H |
Capacity |
Max. Swing Diameter |
560 mm (650 mm, V-type turret only) |
Max. Turning Diameter |
560 mm |
Standard Turning Diameter |
560 mm |
Max. Turning Height |
450 mm (400 mm, V-Type Turret Only) |
Spindle |
Hydraulic Chuck |
305 mm (12") |
Range Of Table Speed |
25-2500 rpm |
Front Bearing Diameter |
120 mm |
Spindle Nose |
A2-8 |
Turret |
Turret Type |
H12 (OPT V4 / V6 / V8) |
Number Of Tool Position |
12 (OPT 4 / 6 / 8) |
Tool Size |
□25, □32, Dia 40 mm |
Feed |
Rapid Rate (X-axis) |
20 M/min |
Rapid Rate (Z-axis) |
20 M/min |
Horizontal travel (X-axis) |
310 mm (-10 + 310 mm, V-Type Turret Only) |
Vertical Travel (Z-axis) |
460 mm (550 mm, V-Type Turret Only) |
Cutting Feedrate |
0.001-500 mm/rev |
Feed Override |
0-150 % |
Motor |
Controller System |
FANUC 0i-T |
Spindle Motor (Cont./30min) |
αilP40 (18.5/22kw) |
Feed Motor (X-axis) |
3 kw |
Feed Motor (Z-axis) |
4 kw (7 kw, V-Type Turret Only) |
Driving Tool Motor
(Cont./30min) |
- |
Miscellaneous |
Coolant Tank |
270L |
Power Requirement |
40 KVA |
Floor Space (L x W, mm) |
1700 x 3100 |
Max. Height |
2855mm |
Net Weight |
6500 kgs |
|
| |
|
|
|