TA-25
|
Please visit our on-line digital catalogs for details.
|
E-CATALOG
|
|
|
|
|
Features
| |
- Max. collet capacity:25mm round for TA25.
- Spindle speed: 550 to 4,200 rpm by 12 steps.
- Cross slide with toolholders, front and rear
- Double vertical slide with toolholders
- Tailstock with A-3 collet quill, draw bar and spring retraction
- Weight operated bar feed
- Adjustable swing stop
- Change gears set for feeds
- Automatic electrical shut off for feed drive clutch and bar feed
- Cam setting dial
- Transparent coolant splash guard, front and rear
- Waterproof sealed fluorescent work lamp
- Oil resisting timing belt drive, special 4:1 ratio polechange motor, and magnetic piece counter for Mod. LA25 and LA32H, good for drilling, reaming and theading operations during a working cycle.
- Available with or without the following special attachments: longitudinal turning, two-position air operated tailstock, four-position mechanical turret, thread/polygonal milling, gravity silent bar feed etc.
- Standard type A15 / 25 TRAUB cams and tooling can be used and interchanged.
|
|
|
|
|
| MODEL |
TA 25 |
| Maximum Capacity |
Round |
25 mm (1") |
| Hexagon |
22 mm (7/8") |
| Square |
18 mm (23/32") |
| Maximum Turning Length (LTA) |
70 mm (2-3/4") |
| Stroke Of Cross Slide |
* 22 mm (7/8") |
| Max. Capacity Of Tailstock Collet |
13 mm (1/2") |
| Max. Tailstock Travel |
100 mm (4") |
| Spindle Speed |
550-4200 rpm |
(12 steps) |
| Production Rate |
28 to 2100 pcs/hr |
| Cycle Time |
1.71 sec/pc to 128.6 sec/pc |
| Power Rating |
Work Spindle Motor |
1.5/1.8 kw (2.0/2.4 HP) |
Feed
Drive Motor |
0.37 kw (1/2 HP) |
Coolant Pump Motor |
0.1 kw (1/8 HP) |
| Content Of Coolant Tank |
40 Liters |
| Net Weight Of Complete Machine |
660 kgs |
| Gross Weight Of Complete Machine |
800 kgs |
Measurement Of Seaworthy Packing Case |
1.8 Cu.M |
* 35 mm (1-3/8") with special designed cross slide cam lever.
|
|
|
|
|
|
|
|
We are always ready to serve you with best regards. |
| |
|
Show Name: MACTECH 2012 - The 12th International Exhibition for Machine Tools, Industrial Tools, Welding & Cutting Equipments Tools, Tools and Production Measurement
Dates: November 22-25, 2012
Venue: Cairo International Convention Center, Egypt
Booth No.: - |
| |
|
Show Name: PRODEX 2012 - International Exhibition for Machine Tools, Tools and Production Measurement
Dates: November 20-23, 2012
Venue: Messe Basel
Booth No.: -
|
| |
|
Show Name: TMTS 2012 Taiwan International Machine Tool Show
Dates: 7-11 November 2012 (Wednesday ‐ Sunday) 09:00 a.m. ‐ 05:00 p.m
Venue: Greater Taichung International Expo Center
Booth No.: A123, Hall 1 |
| |
|
Show Name: TATEF 2012 - 14th International Metalworking Technologies Exhibition
Dates: October 2-7,2012 (10:00 - 19:00)
Venue: Istanbul Expo Center / Cnr Expo, Turkey
Booth No.: -
|
| |
|
Show Name: BIMU 2012
Dates: October 2-6, 2012
Venue: Rho-Pero Fiera Milano (NEW), Italy
Booth No.: -
|
| |
|
Show Name: AMB 2012 - International Exhibition for Metalworking
Dates: September 18-22, 2012
Venue: Stuttgart Trade Fair Centre, Germany
Booth No.: -
|
| |
|
Show Name: IMTS 2012 - International Manufacturing Technology Show
Dates: September 10-15, 2012
Venue: McCormick Place, Chicago, IL, USA
Booth No.: E-5068
|
| |
|
Show Name: IMT 2012 - International Machine Tools Exhibition
Dates: September 10-14, 2012
Venue: Brno Exhibition Centre
Booth No.: -
|
| |
|
